Shopping Cart: €0.00

You have no items in your shopping cart.

YAESU |  FT-DX5000MP - HF/50MHz -Transceiver 200W

More Views

YAESU | FT-DX5000MP - HF/50MHz -Transceiver 200W

Be the first to review this product

Availability: In stock

Excl. Tax: €3,106.56 Incl. Tax: €3,790.00

YAESU HF/50MHz -Transceiver FT-DX5000MP Limited 200W
Superior close-in dynamic range affords the serious DX’ er the best performance possible.

Yaesu FTDX5000MP Limited HF/50MHz base station transceiver


Yaesu FTDX5000MP HF base station transceiver 
FT DX 5000 HF/50 MHz 200W Transceiver Series

The FT DX 5000 Series HF/50 MHz 200 Watt Transceivers are aPremium Class of Yaesu radios with 2 Independent Receivers plus many unique options and accessories designed to meet the Performance Requirements of even the most demanding serious ham Radio operator.

FT DX 5000MP Brief Description:

SM-5000 Station Monitor – Optional
300 Hz, 600 Hz and 3 kHz Roofing Filters – Included
±0.05ppm OCXO – Included.

Supplied Accessories

FH-2 Remote Control Keypad
  Message Keyer, Audio
  Message Memory
  Command and Selection
MH-31B8 Hand Mic

Rugged 200 Watt Output Power

The FTDX 5000 robust and high-power Final Amplifier Stage incorporates two super reliable FET, VRF-150 (Drain-Source Voltage 170 V/Gate Source Voltage ±40 V,
Total Device Dissipation 300 W) in a push-pull configuration, offers solid 200 W output (75 W Class A operation).

Internal Power Supply:

All three FTDX 5000 Series radios have their own built-in power supply
TWO Totally Independent Receivers
All FTDX 5000 Transceivers include Two (2) Totally Independent Receivers to give you Performance and Flexibility previously only
provided by much more expensive radios.

SUPERB 3rd-Order Dynamic Range & 3rd-Order Intercept Point (IP3)

SSB (2.4kHz BW)
10 kHz SEP.:106 dB, IP3 +40 dBm
CW (500Hz BW)
10 kHz SEP:112 dB, IP3 +40 dBm
2 kHz SEP. :105 dB, IP3 +36 dBm
1 kHz SEP. : 99 dB, IP3 +25 dBm

*VFO-A/Main Receiver @ 14 MHz, IPO1 Super Sharp “Roofing” Filters

Super sharp “Roofing” filters for VFO-A/Main Receiver.

Filters are Selectable between *300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF) *300 Hz filter is optional for FTDX 5000 and FTDX 5000D. It is included in the FTDX 5000MP

High Performance Yaesu Custom-designed 32-bit Floating Point DSP

The legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (@300 MHz),
one EACH for VFO-A and VFO-B.
Variable CW Audio Peak Filter & High/Low-Cut Filtering
Variable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology.

- CW Width: 50/100/150/200/250/300/350/400/450/500 Hz
- CW Pitch Frequency: 300~1050 Hz (10 Hz Steps)

True Analog Meter Precision

Enjoy the same Huge Size Metering System as the FT DX 9000 series with True Analog Precision and Instant Reaction Time.

Function Displays for Ease of Operation

Three Electro Luminescence clear Displays included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu
function.

IF Output Available

IF Output (9 MHz) from VFO-A/Main Receiver

Practical Level Indication System for Most Important Settings

The FTDX 5000 provides loads of practical Level Indication that clearly show settings of Mic-Gain / RF Power / CW-Pitch / Keyer
Speed / Processor Level / VOX Delay Time / Break-In Delay Time. -They can be controlled ON/OFF independently!

Introducing the SM-5000 Station Monitor Bandscope

If you need a good Bandscope to enhance your operations, you are going to love our all-SM-5000 matching station monitor.
Included with the Bandscope is a complete, enhanced stereo speaker system with superb audio quality - the speakers are point at
you instead of up into the air above the radio!

Other Valuable Options:

- Yaesu Data Management Unit DMU-2000, and utilize its powerful Audio Scope, Oscilloscope, Spectrum Scope, logging, and Rotator
Control capabilities using your own personally selected and purchased computer display monitor.

- Yaesu External Fully-Automatic Micro-Tuning Units. Three modes available: A (160 m Band), B (80 & 40 m Bands), C (30 & 20 m
Bands)

General:

Rx Frequency Range: 30 kHz - 60 MHz (operating)
1.8 - 29.7 MHz, 50 - 54 MHz (specified performance, ham bands only)
Tx Frequency Ranges: 1.8 - 29.7 MHz, 50 - 54 MHz (ham bands only)
5.16750MHz, 5.33200MHz, 5.34800MHz,
5.36800MHz, 5.37300MHz, 5.40500MHz (USA version only)

Frequency Stability: ±0.05 ppm (MP version, after 1 minute @+14 °F ~ +140 °F [–10 °C ~ +60
°C])
±0.5 ppm (after 1 minute @+14 °F ~ +140 °F [–10 °C ~ +60 °C])

Operating Temperature Range: +14 °F ~ +140 °F (–10 °C ~ +60 °C)
Emission Modes: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
F1B (RTTY), F1D (PACKET), F2D (PACKET)

Frequency Steps: 1/5/10 Hz (SSB,CW, & AM), 100 Hz (FM)

Antenna Impedance: 50 Ohms, unbalanced
16.7 - 150 Ohms, unbalanced (Tuner ON, 1.8 - 29.7 MHz ham bands)
25 - 100 Ohms, unbalanced (Tuner ON, 50 MHz ham band)
Power Consumption: Rx (no signal) 70 VA
(@117 VAC) Rx (signal present) 80 VA

Tx (200 W) 720 VA

Supply Voltage: AC 90 V - AC 264 V

Dimensions (WxHxD): 18.2” x 5.3” x 15.3” (462 x 135 x 389 mm) w/o knob and
connector

Weight (approx.): 46.3 lbs (21 kg)

TRANSMITTER:

Power Output: 10 - 200 watts (CW, LSB, USB, FM, RTTY, PKT)
5 - 50 watts (AM carrier)
10 - 75 watts (Class A: LSB, USB)
Modulation Types: J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage)
F3E (FM): Variable Reactance
Maximum FM Deviation: ±5.0 kHz/±2.5 kHz

Harmonic Radiation: Better than –60 dB (1.8 - 50 MHz ham bands)

SSB Carrier Suppression: At least 60 dB below peak output
Undesired Sideband Suppression: At least 60 dB below peak output
Audio Response (SSB): Not more than –6 dB from 300 to 2700 Hz
3rd-order IMD: –31 dB @14 MHz, 100 watts PEP
–40 dB @14 MHz, Class A: 75 watts PEP
Bandwidth: 500 Hz (CW)
3.0 kHz (LSB, USB)
6.0 kHz (AM)
16 kHz (FM)

Microphone Impedance: 600 Ohms (200 to 10 k Ohms)


RECEIVER:

Circuit Type: VFO-A; Double-conversion superheterodyne
VFO-B; Triple-conversion superheterodyne

Intermediate Frequencies: VFO-A; 9 MHz /30 kHz (24 kHz for AM/FM)
VFO-B; 40.455 MHz/455 kHz /30 kHz (24 kHz for AM/FM)

Sensitivity: SSB (2.4 kHz, 10 dB S+N/N)
2 μV (0.5 - 1.8 MHz, IPO1)
0.2 μV (1.8 - 30 MHz, AMP2)
0.125 μV (50 - 54 MHz, AMP2)
AM (6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz)
6 μV (0.5 - 1.8 MHz, IPO1)
2 μV (1.8 - 30 MHz, AMP2)
1 μV (50 - 54 MHz, AMP2)
FM (BW: 15 kHz, 12 dB SINAD)
0.5 μV (28 - 30 MHz, AMP2)
0.35 μV (50 - 54 MHz, AMP2)

There is no specification in frequency ranges not listed.

Squelch Sensitivity (AMP2): SSB/CW/AM
2 μV (0.1 - 30 MHz)
2 μV (50 - 54 MHz)
FM
1 μV (28 - 30 MHz)
1 μV (50 - 54 MHz)

There is no specification in frequency ranges not listed.

Selectivity (–6/–60 dB): Mode –6 dB –60 dB
CW 0.5 kHz or better 750 Hz or less
LSB, USB 2.4 kHz or better 3.6 kHz or less
AM 6 kHz or better 15 kHz or less
FM 12 kHz or better 30 kHz or less

Image Rejection: 70 dB or better (1.8 - 29.7 MHz ham bands, VRF: ON)
60 dB or better (50 MHz ham band)

Maximum Audio Output: 2.5 W into 4 Ohms with 10% THD

Audio Output Impedance: 4 to 8 Ohms (4 Ohms: nominal)

Conducted Radiation: Less than 4000 μμW

shown with station monitor top mounted!

Additional Information

Brand YAESU
Free Shiping No

Customer Reviews

Write Your Own Review

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.